In spherical roller thrust bearings the load is transmitted from one raceway to the other at an angle to the bearing axis. The bearings are therefore suitable to accommodate radial loads in addition to simultaneously acting axial loads. Another important characteristic of spherical roller thrust bearings is their self-aligning capability. This makes the bearings insensitive to shaft deflection and misalignment of the shaft relative to the housing.

Spherical roller thrust bearings are produced in two designs depending on the size and series. Bearings up to and including size 68 identified by the designation suffix E have a pressed steel window-type cage which, with the rollers, forms a non-separable assembly with the shaft washer. All other bearings have a machined brass or steel cage which is guided by a sleeve held in the shaft washer bore. The shaft washer and cage with rollers form a non-separable unit. roller bearing, thrust bearing

Taper roller thrust bearings enable axially very compact bearing arrangements to be produced which can carry very heavy axial loads, are insensitive to shock loads and are stiff. taper roller bearing, taper roller bearings WORT bearings produces single direction taper roller thrust bearings and double direction taper roller thrust bearings. The screw-down bearings constitute a special design of single direction taper roller thrust bearing and have a full complement of rollers. They are used for rolling mill screw-down arrangements. screw-down bearing

If you have any questions, please contact with us directly.